Single Door Enclosure with 3 Point Latching System

N4X-3P SERIES

NEMA/EEMAC TYPE 3R, 4, 4X, 12

 Application

Ralston's N4X-3P single door enclosures are applied indoors and outdoors to house such items as: electronic and electrical controls, instrumentation systems, pneumatic, hydraulic, and machine tool controls. 

These enclosures are designed to provide protection against dust, dirt, oil, and water. They are for use in areas such as dairies and breweries where they are subject to frequent high pressure hosing and generally wet conditions. (Not submersible) 

Construction

All N4X-3P enclosures are made from 14 ga. cold rolled steel and have continuously welded seams ground to a smooth finish. The N4X-3P enclosure has a folded lip around the door opening to provide complete and maximum gasket contact, and to prevent liquids from dripping into the enclosure when the door is open.

Each enclosure comes complete with a removable 12 ga. back panel mounted on 3/8 collar stud, 1/4-20 grounding studs, and four wall mounting back brackets.

Each enclosure door is equipped with urethane gasket, a removable print pocket, padlocking hasp, 1/4-20  grounding studs and 3 point padlocking handle (Note: Enclosures with a width of 36" come equipped with quarter tum slotted latches in addition to the 3-point mechanism). The door is easily removed by pulling the pin on the continuous stainless steel piano hinge.

Finish

All enclosures are phosphatized and finished inside and out with ANSI/ASA 61 grey polyester powder coating. Inner back panels are painted with high gloss white powder coatings.

Standards

N4X-3P enclosures are built to the requirements of NEMA/EEMAC type 12 specifications for use with industrial control equipment in ordinary locations, type 13 for an oil and dust tight enclosure, type 4, 4X as a water tight enclosure and 3R to provide a degree of protection against ingress of solid foreign objects (falling dirt), and ingress of water (rain, sleet, snow). 

N4X-3P enclosures are CSA certified type 3R, 4, 4X, 12

Special Orders

Custom units made from stainless steel or with special finishes, sizes or punching can be supplied in order.

Available Sizes

N4X-3PSS-161206: 16 x 12 x 6

N4X-3PSS-316-161206: 16 x 12 x 6

N4X-3PSS-161606: 16 x 16 x 6

N4X-3PSS-316-161606: 16 x 16 x 6

N4x-3PSS-162006: 16 x 20 x 6

N4X-3PSS-316-162006: 16 x 20 x 6

N4X-3PSS-201606: 20 x 16 x 6

N4X-3PSS-316-201606: 20 x 16 x 6

N4X-3PSS-202006: 20 x 20 x 6

N4X-3PSS-316-202006: 20 x 20 x 6

N4X-3PSS-242006: 24 x 20 x 6

N4X-3PSS-316-242006: 24 x 20 x 6

N4X-3PSS-241608: 24 x 16 x 8

N4X-3PSS-316-241608: 24 x 16 x 8

N4X-3PSS-242008: 24 x 20 x 8

N4X-3PSS-316-242008: 24 x 20 x 8

N4X-3PSS-242408: 24 x 24 x 8

N4X-3PSS-316-242408: 24 x 24 x 8

N4X-3PSS-243008: 24 x 30 x 8

N4X-3PSS-316-243008: 24 x 30 x 8

N4X-3PSS-302008: 30 x 20 x 8

N4X-3PSS-316-302008: 30 x 20 x 8

N4X-3PSS-302408: 30 x 24 x 8

N4X-3PSS-316-302408: 30 x 24 x 8

N4X-3PSS-303008: 30 x 30 x 8

N4X-3PSS-316-303008: 30 x 30 x 8

N4X-3PSS-362408: 36 x 24 x 8

N4X-3PSS-316-362408: 36 x 24 x 8

N4X-3PSS-363008: 36 x 30 x 8

N4X-3PSS-316-363008: 36 x 30 x 8

N4X-3PSS-423608: 42 x 36 x 8

N4X-3PSS-316-423608: 42 x 36 x 8

N4X-3PSS-483608: 48 x 36 x 8

N4X-3PSS-316-483608: 48 x 36 x 8

N4X-3PSS-242010: 24 x 20 x 10

N4X-3PSS-316-242010: 24 x 20 x 10

N4X-3PSS-362410: 36 x 24 x 10

N4X-3PSS-316-362410: 36 x 24 x 10

N4X-3PSS-363010: 36 x 30 x 10

N4X-3PSS-316-363010: 36 x 30 x 10

N4X-3PSS-423010: 42 x 30 x 10

N4X-3PSS-316-423010: 42 x 30 x 10

N4X-3PSS-242412: 24 x 24 x12

N4X-3PSS-316-242412: 24 x 24 x 12

N4X-3PSS-302412: 30 x 24 x 12

N4X-3PSS-316-302412: 30 x 24 x 12

N4X-3PSS-363012: 36 x 30 x 12

N4X-3PSS-316-363012: 36 x 30 x 12

N4X-3PSS-363612: 36 x 36 x 12

N4X-3PSS-316-363612: 36 x 36 x 12

N4X-3PSS-483612: 48 x 36 x 12

N4X-3PSS-316-483612: 48 x 36 x 12

N4X-3PSS-603612: 60 x 36 x 12

N4X-3PSS-316-603612: 60 x 36 x 12

N4X-3PSS-302416: 30 x 24 x 16

N4X-3PSS-316-302416: 30 x 24 x 16

N4X-3PSS-363016: 36 x 30 x 16

N4X-3PSS-316-363016: 36 x 30 x 16

N4X-3PSS-483616: 48 x 36 x 16

N4X-3PSS-316-483616: 48 x 36 x 16

  • Download PDF(s)
  • Download CAD files
CAD files are listed by part number. Find the part number in the PDF(s) above.
There are currently no downloads posted for this product. Please check
back later!
  • Accessories
See the Accessories page to
view available accessories.

LEARN MORE

Stainless Steel Enclosures

are made for corrosive environments. If your plant subjects its enclosures to frequent high pressure

hosing or generally wet conditions, stainless steel

is for you. Water and dust

tight covers and its corrosive resistant nature guarantees

the protection you’re looking for.

RALSTON METAL PRODUCTS LTD. Watson Plant: 50 Watson Rd., South, Guelph, ON, N1L 1E2
Phone: 1.519.836.2968 | Toll Free: 1.800.265.7611 | Fax: 1.519.836.9763
E-mail: service@ralstonmetal.com | General Inquiries